A machine needs cooling, but does it need a heat exchanger or a chiller? The answer depends on the temperature you must maintain and the cooling source already available at your facility.
A heat exchanger transfers heat from a process fluid to another fluid or to air. A chiller supplies cooled fluid by using a refrigeration system. They can be alternatives in some applications, but they can also work together. Before comparing equipment prices, check whether your available cooling water or air can remove the required heat throughout the year.
What Does a Heat Exchanger Do—and What Does a Chiller Add?
A heat exchanger moves heat between two streams without mixing them. For example, hot hydraulic oil can transfer heat to plant cooling water through a shell and tube unit. An air cooled exchanger can transfer heat from a circulating fluid to ambient air. For a closer look at the equipment itself, see our guide to heat exchanger basics.
An industrial chiller does more than transfer heat. Most use a refrigeration circuit to produce chilled water or another cooled liquid, then circulate that liquid to the process. The refrigeration circuit contains heat exchangers, including an evaporator and a condenser.
| Question | Standalone heat exchanger | Industrial chiller |
|---|---|---|
| Where does the cooling come from? | An available colder fluid or ambient air | A refrigeration system produces a colder circulating fluid |
| Can it create a colder cooling source? | No | Yes, within its specified operating range |
| What supporting equipment may be needed? | Pumps, fans, valves, or a facility cooling-water supply | Refrigeration components, pumps, controls, and heat exchangers |
| What determines energy use? | The complete cooling circuit, including its cooling source | The refrigeration system and the complete cooling circuit |
The energy comparison needs care. An exchanger connected to chilled water still depends on the energy used to produce that water. A standalone exchanger may also need pump or fan power.
Can Your Available Cooling Source Reach the Target Temperature?
Start with the required process outlet temperature, then compare it with the temperature of the cooling medium entering the exchanger. Heat needs a temperature difference to flow. In a conventional exchanger, the process fluid cannot leave colder than the incoming cooling medium; in practice, it needs an additional temperature difference for effective heat transfer.
Consider two simplified cases. If cooling water enters at 20°C and a process must leave at 30°C, a properly sized exchanger may meet the duty. Flow rates and heat load still need checking. If the available water enters at 25°C but the process must leave at 15°C, that exchanger alone cannot meet the target. The system needs a colder source, which could be supplied by a chiller.
Check the hottest expected cooling-water or ambient-air conditions, not just a reading from one day. A water supply that works in winter may be too warm in summer. Also confirm that the available water flow can absorb the heat load without exceeding the permitted outlet temperature.
These checks establish whether a heat exchanger is feasible; they do not determine its size on their own. Our heat exchanger sizing guide explains the operating data needed for a detailed selection.
Where Does Each Option Fit in Industrial Cooling?
Use an available cooling source through a heat exchanger when its temperature and flow can meet the process requirement. A circulating oil system, for example, may use a custom shell and tube heat exchanger to reject heat to plant water. Where suitable cooling water is unavailable, an air cooled heat exchanger may be considered, provided the ambient conditions allow it to meet the target temperature.
Use a chiller when the process needs a colder source than plant water or air can reliably provide. This may apply to equipment with a tight process temperature requirement or a cooling duty that must be maintained through hot weather. The required chilled-fluid temperature and capacity must be established from the actual process load.
Use both when the circuits need to be separated. A chiller can supply chilled water while an external heat exchanger transfers heat from a separate process-water or oil circuit. This arrangement can keep the process fluid out of the chiller’s water circuit. Whether it is appropriate depends on fluid compatibility, temperature approach, pressure drop, controls, and maintenance requirements.
The choice is therefore about the whole cooling circuit. A chiller can provide the cold source; an exchanger transfers heat at the point where the process needs cooling.
Need a Custom Heat Exchanger for Your Cooling Circuit?
JED manufactures custom heat exchangers for industrial cooling projects. If your system uses plant water, ambient air, or chilled water as its cooling source, send us the two-side operating data and any available drawings. We can review the exchanger’s required performance, materials, dimensions, and connections.
For a new installation or replacement, send your cooling requirements and drawings to JED. We will assess the heat exchanger component that fits your circuit.
Heat Exchanger vs. Chiller FAQ
Can one heat exchanger serve several machines?
Yes, if its total heat duty and flow arrangement are designed for their combined operation. Each machine may still need appropriate flow control, especially when machines run at different times or have different temperature limits.
What if the available cooling water contains scale or solids?
Water quality affects fouling and cleaning frequency. Share the water source and known contamination with the manufacturer so materials, flow passages, filtration requirements, and cleaning access can be considered during selection.
Can a replacement exchanger match existing pipe connections?
A custom unit can be designed around confirmed connection locations and installation dimensions. Provide the old drawing or measured dimensions, but also provide current temperatures, flows, and pressures so the replacement is checked for performance as well as fit.